bobbins (9677282509) part number: 9677282509 77 bobbin 3pc. assembly explanation of part numbers: C?digits 1 & 2 = product class C digits 3 & 4 = material grade ? C last digit 8 = coated bobbin bobbins are an economical and well- proven core design for many applications where relatively low but stable inductance values are required. for higher frequency designs, use small bobbins in 43 material. ? for power applications, bobbins in 77 material are specified for a l and dc bias limits. bobbins in figures 2-5 can be supplied with a uniform thermo- set plastic coating which can withstand a minimum breakdown of 500vrms. this coating will change the dimensions a maximum of 0.5 mm (0.020 ). the last digit of the thermo- set plastic coated part is an 8. ?for any bobbin requirement not listed in the catalog, please contact our customer service group for availability and pricing.? weight: 38 (g) chart legend a l ?: ?inductance factor ? ,?? nl?:?value of dc ampere- turns,??? a w :winding area, n/ awg?:?number of turns/ wire size for test coil electrical properties a l (nh) 95 10% a l min. @ nl (at) 81 - 520 n/ awg 55/18 a w (cm 2 ) 0.99 bobbins are tested for a l value at 1khz < 10 gauss. fair- rite products corp.?? ? ??one commercial row, wallkill, new york 12589-0288 888-324-7748 ?? ? ?? 845-895-2055 ?? ? ?? fax: 845-895-2629 ?? ? ?? ferrites@fair- rite.com ?? ? ??www.fair- rite.com dim mm mm tol nominal inch inch misc. a 28 0.70 1.102 _ b 25 0.70 0.985 _ d 18 0.45 0.708 _ f 17 0.40 0.67 _ g 3 0.30 0.118 _ h 4.2 0.15 0.165 _
|